One of
the great advances in technology that our modern society benefits from has been
the introduction of safety glass. This product is inherently safer than just
regular glass, specifically because if it should break, it won't produce
dangerous and potentially harmful shards of glass. Instead it breaks into
little chunks of glass, which are far less likely to cause any injury or harm
to anybody nearby.
As a
result, it has become practically mandatory everywhere in the world in such
applications as passenger cars, and commercial airplanes, for obvious reasons.
But it is also extensively used in other applications where these benefits
might not be as obvious. For instance, most glass shower doors are now made
with tempered glass, as well as the glass trays that are found in modern
refrigerators. Another logical choice that doesn't immediately come to mind is
the glass that is used in modern diving masks.
It
makes perfect sense that this modern marvel would be used in high security
situations, such as bullet proof glass, which can be used in many different
applications, such as automobile windows, or even glass walls. One often sees
in movies how the bad guys fire on the heroes, who are protected by bullet
proof glass. It really works pretty much the way you see in the movies: as it
can take many shots to even make a dent!
Toughened
glass, which is often confused with safety glass, has been required in the
United States since 1977 in many situations. As an example, any glass that is
located within 46 centimetres of any floor or doorway must be constructed of
toughened glass. While both safety and toughened glass are created in basically
the same way, their specifications are different. Both are built by basically
heating regular glass way past normal temperatures, which causes a physical
change in the glass.
It
causes the inner layers of the glass to contract more than the outer surfaces.
This creates compression in the glass, which is measured by a method known as
MPa. The basic difference between the two tempered glass types is that
toughened glass can have a minimum specification of 69 MPa. Safety glass,
however, has to have a higher rating, which is at least 100 MPa.
For
most uses, toughened glass is the perfect solution. Additionally, toughened glass prices UK are quite
affordable, while allowing for a wide variety of uses and sizes. It can truly
be the best choice in most situations.
For
more information about toughened glass prices UK, visit www.visualglass.co.uk
No comments:
Post a Comment